If you manage a marina, municipal waterfront, or recreational facility, choosing the right gangway is one of the most important decisions you'll make for your dock system. Get it right and you have a safe, low-maintenance connection between shore and floating dock for decades. Get it wrong and you're dealing with structural failures, ADA violations, or a gangway that simply doesn't fit your tidal range.
This guide covers everything you need to know before you buy.
What Is an Aluminum Gangway?
A gangway is a sloped walkway that connects a fixed structure on shore — a bulkhead, seawall, or pier — to a floating dock that rises and falls with the water level. Unlike a fixed ramp, a gangway is hinged at the shore end and rests on a roller or wheel at the dock end, allowing it to pivot as the water level changes.
Aluminum is the dominant material for modern gangways because it offers the best combination of strength, weight, and corrosion resistance. Unlike wood, it won't rot, warp, or require annual painting. Unlike steel, it won't rust in saltwater or brackish environments. And unlike composite materials, it can be fabricated to precise structural tolerances for heavy commercial loads.
Key Factors to Consider
1. Length
Gangway length is determined by two things: the horizontal distance between shore and dock, and the maximum tidal or water-level variation at your site.
A longer gangway produces a shallower slope at low water — which is both safer and required for ADA compliance. As a general rule, plan for a gangway that's at least three times the maximum tidal variation. For example, if your site has a 4-foot tidal range, you need at least a 12-foot gangway to keep the slope manageable.
For ADA-compliant installations, the slope must not exceed 1:12 (one inch of rise for every twelve inches of run) at any water level. This often requires gangways of 40 to 80 feet or more at sites with significant tidal variation.
2. Width
Standard gangway widths run from 3 feet to 8 feet. The right width depends on your application:
- 3–4 feet: Residential and light commercial use, single-file pedestrian traffic
- 5–6 feet: Commercial marinas, two-way pedestrian traffic, light equipment access
- 7–8 feet: High-traffic facilities, ADA requirements, golf cart or utility vehicle access
For ADA compliance, the minimum clear width is 36 inches, but 48 inches or wider is recommended to allow a wheelchair to pass a standing person.
3. Slope and Tidal Range
The slope of your gangway changes constantly as the water level rises and falls. The critical design question is: what is the maximum slope at the lowest water level you'll ever encounter?
TechniDock's slope calculator (available on our gangway page) helps you determine the required gangway length for your site's tidal range and ADA requirements. As a reference:
- A 1:12 slope (ADA maximum) requires 12 feet of gangway for every 1 foot of rise
- A 1:8 slope (typical non-ADA commercial) requires 8 feet of gangway for every 1 foot of rise
- A 1:4 slope (steep, residential only) requires 4 feet of gangway for every 1 foot of rise
4. Load Rating
Gangways are rated by the distributed load they can safely carry, expressed in pounds per square foot (PSF). Common ratings:
- 40 PSF: Light residential use, pedestrian traffic only
- 60 PSF: Standard commercial, pedestrian and light equipment
- 100 PSF: Heavy commercial, utility vehicles, fork access
Always specify your load requirements upfront. A gangway undersized for its actual use is a liability.
5. Decking Options
The walking surface of your gangway affects both safety and maintenance:
- Open-bar aluminum grating: Maximum drainage, excellent slip resistance, low maintenance. Standard for most commercial applications.
- Composite decking: Solid surface, more comfortable underfoot, better for facilities with wheeled equipment or mobility devices.
- Hardwood decking: Aesthetic option for yacht clubs and upscale facilities. Requires more maintenance than aluminum or composite.
6. Handrail Configuration
Standard gangways include handrails on both sides. Options include:
- Single-rail: One horizontal rail at 42 inches, standard for most applications
- Double-rail: Two horizontal rails, required for ADA compliance and recommended for high-traffic facilities
- Cable rail: Stainless steel cable infill for a cleaner aesthetic
- Center rail: A third rail down the center for very wide gangways
For ADA compliance, handrails must be continuous, graspable, and extend 12 inches beyond the top and bottom of the ramp.
Standard vs. ADA Gangways: What's the Difference?
The core structural difference between a standard and ADA gangway is slope. An ADA gangway is designed to maintain a slope of 1:12 or less at all water levels within the design tidal range. This typically means a longer gangway, wider decking, and specific handrail configurations.
Beyond slope, ADA gangways must also meet requirements for:
- Edge protection: Curbs or barriers to prevent wheelchair wheels from slipping off the edge
- Handrail extensions: Rails must extend 12 inches horizontally beyond the top and bottom landings
- Surface texture: The walking surface must be stable, firm, and slip-resistant
- Cross slope: The gangway must not slope more than 1:48 perpendicular to the direction of travel
If your facility is open to the public — a municipal marina, state park boat launch, or public fishing pier — ADA compliance is not optional. It's a federal requirement under the Americans with Disabilities Act.
Aluminum Gangway vs. Other Materials
| Material | Lifespan | Maintenance | Weight | Cost |
|---|---|---|---|---|
| Aluminum | 30–50+ years | Minimal | Light | Moderate–High |
| Steel | 15–25 years | High (painting, rust) | Heavy | Moderate |
| Wood | 10–20 years | High (sealing, painting) | Moderate | Low–Moderate |
| Composite | 20–30 years | Low | Moderate | Moderate–High |
For most commercial and municipal applications, aluminum offers the best total cost of ownership over a 20-year horizon, even if the upfront cost is higher than wood or steel.
Questions to Ask Before You Order
Before contacting a gangway manufacturer, have answers to these questions ready:
- What is the maximum tidal or water-level variation at your site?
- What is the horizontal distance from shore to the floating dock?
- Is ADA compliance required?
- What is the expected pedestrian load (people per hour at peak)?
- Will any wheeled equipment (carts, forklifts) use the gangway?
- What decking material do you prefer?
- Are there any width restrictions at the shore end or dock end?
The more detail you can provide, the more accurate your quote will be — and the less likely you are to end up with a gangway that doesn't fit your site.
Why TechniDock?
TechniDock has been manufacturing aluminum gangways and dock systems from Speculator, NY since 1983. Every gangway is custom-built to order — we don't sell off-the-shelf products because no two waterfront sites are the same.
Our gangways are installed at marinas, state parks, municipal facilities, yacht clubs, rowing clubs, and residential waterfronts across the Northeast and beyond. We work directly with facility managers, engineers, and procurement teams to spec the right solution for each project.
Request a quote for your aluminum gangway project — we'll review your site requirements and get back to you with a detailed proposal.
